Eumeca s.r.l. is the exclusive Italian distributor of all software developed by Struct4U.
Struct4U is a Dutch company founded in 2014. All software is developed “in house”, in the Netherlands, thanks to a team of experienced engineers and programmers. They use the latest programming techniques (C # .NET) which enable rapid and effective development.
Our mission, together with Struct4U, is to improve the quality of our programs and develop new modules.
È possibile scegliere la licenza annuale. Con la licenza annuale, tutti i programmi possono essere usati senza limiti da un solo utilizzatore. Questa opzione è perfetta se sai in anticipo che utilizzerai molto il software.
Per la politica di prezzi in vigore, è possibile fare riferimento al sito ufficiale.
Struct4U è composto da diversi moduli:
- XFEM4U
- XFrame2D
- XBeam2D
- XConstruct
XFEM4U
XFEM4U è il software più intuitivo di analisi strutturale e di progettazione per modelli 3D di qualsiasi strutture in acciaio. L’interfaccia “user friendly” assicura prestazioni fluide e permette l’inserimento rapido di strutture in 3D. Il programma è estremamente facile da utilizzare (anche senza aver letto inizialmente il manuale), intuitivo, moderno e incredibilmente veloce. XFEM4U sfrutta la tecnologia OpenGL. Funzioni di snap sui nodi esistenti, sulle travi, sulla griglia, in X-, in Y- e sull’asse Z, ma anche Copia, Specchia, Copia multipla, Ruota… sono funzioni che permettono l’inserimento facile e rapido dei tuoi modelli di strutture 3D – OpenGL.
XFEM4U possiede un potente risolutore che ti consente di effettuare in modo veloce calcoli geometrici lineari (GL – analisi del primo ordine) o non lineari (GNL – analisi del secondo ordine).
XFEM4U permette l’importazione di file. In questa versione è possibile importare file DXF, SDNF e XML. Altri formati importabili saranno presto disponibili, come l’importazione di file IFC.
ACCIAIO
XFEM4U possiede un modulo completamente integrato dell’Eurocodice EN 1993 per la progettazione di strutture in acciaio. Verifiche e regole di progettazione di strutture in acciaio in accordo con i più recenti e innovativi standard Europei. Sarai aggiornato con gli ultimi standard. In XFEM4U tutte le verifiche di progettazione date dall’Eurocodice sono basate sull’analisi geometrica non lineare. Le imperfezioni (imperfezioni laterali iniziali) saranno automaticamente incluse al calcolo delle combinazioni di carico. Si tratta di un metodo di calcolo accurato, applicabile per ogni tipologia di telaio (oscillanti o rinforzati, oppure non oscillanti). Inoltre non è necessario ulteriormente calcolare la lunghezza di instabilità. L’analisi geometrica non lineare (analisi del secondo ordine) assicura la verifica globale dell’instabilità dovuta all’inflessione. XFEM4U ti aiuta.
CEMENTO ARMATO
XFEM4U possiede un modulo completamente integrato dell’Eurocodice EN 1992-1-1 relativo al calcestruzzo per la progettazione e la verifica dei rinforzi. Sarai capace di cambiare interattivamente tutti i tuoi rinforzi primari longitudinali e secondari, e pure le staffe. Facile e veloce. Le travi in calcestruzzo saranno verificate completamente ad ogni cambio dei valori di input. Il calcolo è completo: verifica rispetto allo Stato Limite Ultimo (S.L.U.) e allo Stato Limite di Esercizio (S.L.E.). Quasi tutte le forme di sezione
SCARICA DAL SITO UFFICIALE
XFrame2D
XFrame2D is the most intuitive MOST structural analysis and design software for 2D trusses and frames.The user interface ensures smooth performance and allows for quick entry of the facility. The program is extremely easy to use (even without reading the manual first), intuitive, modern and incredibly fast.
XFrame2d has a very powerful mechanical solver that allows you to perform geometrically linear (GL first order analysis) or nonlinear (LNG second order analysis) calculations.
XFrame2D has a load generator that allows you to generate wind and snow loads according to the Eurocode. The program automatically detects the shape of the roof (flat roof, single roof or pitched roof) and determines all the wind and snow load
STEEL
XFrame2D has a fully integrated Eurocode EN 1993 steel design module. Steel tests / design rules according to the latest / latest European standards. You are up to date with the latest standards. In XFrame2D all the Eurocode design controls are based on a geometrically non-linear analysis. The imperfections (imperfections of the initial flood) will automatically be included in the calculation of the load combinations. This is a very accurate calculation method and is applicable for any type of frame. Swayed or reinforced / non-swinging frames. Also. It is no longer necessary to calculate buckling lengths (prone to errors). The non-linear geometric analysis (second order analysis) guarantees the global control of the instability stability. XFrame2D helps you.
XFrame2D has a fully integrated EN 1993-1-8 steel connection module. The beam and column moment junctions can be inserted easily.
The rotational stiffness of the connections depends on the load and influences the overall analysis. In XFrame2d, load-dependent rotational stiffness is automatically considered for all (semi) rigid connections. This obviously provides the most accurate result and leads to an economically optimal design.
In small moments (less than 2/3 Mj, Rd), the initial rotational stiffness Sj, ini is calculated. At larger moments with the rotational stiffness Sj corresponding to the bending moment Mj, Ed. The trilinear rotational stiffness diagram is used.
Steel structures can now be much cheaper By already considering flexible (semi-rigid) connections rather than fully rigid connections in the main structure design, the connections can become much cheaper and a correct overall analysis is calculated. With XFrame2d, the engineer quickly and easily designs an economical steel frame structure, including all (semi) rigid connections. This also saves the cost of a detail engineer.
XFrame2D has a fully integrated Eurocode EN 1995 timber design module.Timber testing / design rules according to the latest / latest European standards. You are up to date with the latest standards. In XFrame2D all Eurocode design controls are based on a geometrically non-linear global analysis. The imperfections will automatically be included in the calculation of the load combinations. This is a very accurate calculation method and is applicable for any type of frame. Also. It is no longer necessary to calculate buckling lengths (prone to errors). The non-linear geometric analysis (second order analysis) guarantees the global control of the instability stability. XFrame2D ti aiuta.
SCARICA DAL SITO UFFICIALE
XConstruct
You can add multiple calculations to your project. Sure, you can move, copy and delete. You will experience how simple it is.
In this first version of XConstruct you can select the following calculations:
- Steel: beam-column joints; Column; Connection fitting; Bolt; Section built
- Concrete: concrete section; punching; creep
- Timber: beam; Column
XConstruct was developed so that you can easily add new modules. We will rapidly expand the number of modules in the coming months. Do you have any suggestions or wishes? Let us know! With your help we can extend XConstruct with this new feature.
XConstruct has a handy feature that allows you to combine multiple PDF files into one PDF file, including an optional table of contents. This way you can quickly and easily generate a readable report. Since the information is stored in the project file, you can easily generate a new report when one of the attachments is changed.
SCARICA DAL SITO UFFICIALE
XBeam2D
Using the wizard you can generate your own beam of steel or concrete, continuous on different supports quickly and easily. XBeam2D calculates the radius in an instant. The program is extremely easy to use, intuitive, modern and very fast.
XBeam2D has a very powerful mechanics solver that allows you to perform geometrically linear calculations (GL first order analysis)
XBeam2D has a fully integrated Eurocode EN 1992-1-1 concrete module that allows you to design and control the reinforcement. It is also possible to interactively modify all the reinforcement, the longitudinal and secondary reinforcement and the stirrups. Quick and easy. The concrete beam will be fully checked after each input change. The calculation is complete: checks in Ulitimate Limit State (ULS) and Service Limiet State (SLS). Almost all forms of cross section with or without a layer of concrete; 2-layer reinforcement; compression reinforcement; accurate calculation of long-term deflection; detailed calculation report
XBeam2D has a fully integrated Eurocode EN 1993-1-1 steel module that allows you to design and control steel according to the brand new / latest EUROCODES. You are up to date.
XBeam2D has a fully integrated Eurocode EN 1995-1-1 wood module which allows timber design and verification according to the latest / latest EUROCODES. You are up to date.
DOWNLOAD FROM OFFICIAL SITE
[download id=”1787″]